Digital Downloads for Real-World Impact
FEATURED DOWNLOADS
This is a digital STL file for a front number plate, designed specifically to fit 2017–2022 KTM off-road and motocross models. Optimized for 3D printing, this design requires minimal support material and limited post-processing—making it a great base for customization and personalization. Use this file as a blank canvas to add your own graphics, logos, or creative touches directly within your slicer software.
Sized to fit within a 256mm x 256mm x 256mm build volume, it is suggested to use two plates for easier printing and handling. All parts are included in the download.
Print details (as shown in video):
Print time Plate 1: 7 hour 16 minute
Print time Plate 2: 2 hour 35 minute
Infill: 80%
Filament used: ASA-CF
Estimated material cost plate 1: $6.83
Estimated material cost plate 2: $2.26
Product Disclosure
Please note that this product is a digital download only and includes a .STL file format. No physical item will be shipped.
By purchasing this file, you acknowledge and agree to the following:
Personal Use Only: This file is intended strictly for personal use. It may not be resold, shared, or used for commercial production without the express written permission of Sahloak, LLC.
No Liability: Sahloak is not responsible for any issues that may arise from the use of this file.
Non-Refundable: All digital purchases are final and non-refundable.
Download Access: After checkout, a download link will be sent to the email address provided. The file will be available for download for 24 hours.
By proceeding with your purchase, you agree to these terms.
This digital download includes a .22 caliber ammunition insert set designed specifically for 4" × 4" Milwaukee Packout bins, compatible with models 48-22-8430 and 48-22-8435. The modular inserts stack neatly inside the bin, with each insert holding 100 rounds, allowing for a total capacity of 300 rounds per bin.
The lower bins—are identical and fully interchangeable while the upper bin seats at the correct height for secure storage, locking the ammunition in place when the bin is closed, minimizing movement during transport. Integrated finger-pull access makes each insert easy to remove for quick loading and use.
Upgrade your Packout system with an organized, efficient solution that keeps your .22 ammunition protected and ready when you need it.
Print details (as shown in video):
Print time Plate 1: 13 hour 37 minute
Infill: 100%
Filament used: ASA
Estimated material cost: $5.36
Product Disclosure:
Please note that this product is a digital download only and includes a .STL file format. Not a physical item.
By downloading this file, you acknowledge and agree to the following:
Personal Use Only: This file is intended strictly for personal use. It may not be resold, shared, or used for commercial production without the express written permission of Sahloak, LLC.
No Liability: Sahloak is not responsible for any issues that may arise from the use of this file.
By proceeding with your download, you agree to these terms.
For download is an STL file for a custom Milwaukee Packout insert designed specifically for the M12 drill and impact (model numbers shown in photos). Made to fit the Packout 48-22-8435, this insert features a simple snap-together design that secures your tools with minimal movement when the case is closed.
The insert also provides additional storage beneath the tools, perfect for organizing bits, drivers, and small accessories. Included are three removable trays for quick access and customizable organization.
Keep your Packout system neat, efficient, and ready for the job with this practical, purpose-built insert.
Print details (as shown in videos):
Print time Plate 1: 9 hour 30 minute
Infill: 15%
Filament used: ASA
Estimated material cost: $6.50
Print time Plate 2: 9 hour 20 minute
Infill: 15%
Filament used: ASA
Estimated material cost: $6.40
Product Disclosure:
Please note that this product is a digital download only and includes a .STL file format. Not a physical item.
By downloading this file, you acknowledge and agree to the following:
Personal Use Only: This file is intended strictly for personal use. It may not be resold, shared, or used for commercial production without the express written permission of Sahloak, LLC.
No Liability: Sahloak is not responsible for any issues that may arise from the use of this file.
By proceeding with your download, you agree to these terms.
A sleek cup holder design for insulated can coolers. Fits seamlessly on paddle boards, kayaks, and more. Featuring a unique woven design for enhanced strength and stability, it ensures a secure hold on most surfaces—while allowing for quick and easy installation and removal. The print file is creatively configured to eliminate the need for supports during the printing process.
Print details (as shown in video):
Print time: 5 hour 49 minute
Infill: 25%
Filament used: ASA
Estimated material cost: $3.10
Product Disclosure
Please note that this product is a digital download only and includes a .STL file format. No physical item will be shipped.
By purchasing this file, you acknowledge and agree to the following:
Personal Use Only: This file is intended strictly for personal use. It may not be resold, shared, or used for commercial production without the express written permission of Sahloak, LLC.
No Liability: Sahloak is not responsible for any issues that may arise from the use of this file.
Non-Refundable: All digital purchases are final and non-refundable.
Download Access: After checkout, a download link will be sent to the email address provided. The file will be available for download for 24 hours.
By proceeding with your purchase, you agree to these terms.
For sale is a digital STL file combo set for an ammunition organizer designed to fit the Milwaukee Packout model 48-22-8435.
This versatile combo kit includes multiple modular inserts, allowing you to customize your Packout exactly to your needs. All components are designed to stack neatly and fit securely to minimize movement when the lid is closed.
Included in this STL file set:
1 screw-top container for general or small-item storage
1 large stackable bin insert set
.22 caliber bin insert set (300-round capacity)
.223 caliber bin insert set (40-round capacity)
9mm bin insert set (100-round capacity)
This combo set is ideal for mixing and matching inserts to create a layout that works best for your storage needs, whether for range days or organized storage. Designed with functionality and efficiency in mind, it keeps your ammunition secure, accessible, and neatly organized.
Product Disclosure:
Please note that this product is a digital download only and includes a .STL file format. Not a physical item.
By downloading this file, you acknowledge and agree to the following:
Personal Use Only: This file is intended strictly for personal use. It may not be resold, shared, or used for commercial production without the express written permission of Sahloak, LLC.
No Liability: Sahloak is not responsible for any issues that may arise from the use of this file.
By proceeding with your download, you agree to these terms.
Upgrade your paddle board with this 9" tall fin design—created specifically for 3D printing. This simple, no-frills file is a great starting point for custom builds or quick replacements.
Designed as a universal-style fit, it’s compatible with a wide range of paddle boards. However, we recommend checking the included dimensions to ensure proper fitment before printing.
Please note: this fin is not designed to match any one brand or model—it’s a generic design meant to offer flexibility across multiple setups.
Clip included in the file for secure attachment.
File Format: STL
Printing Note: Optimized for easy 3D printing with minimal post-processing.
Print details (as shown in video):
Print time: 4 hour 51 minute
Infill: 100%
Filament used: ASA
Estimated material cost: $5.00
Product Disclosure
Please note that this product is a digital download only and includes a .STL file format. No physical item will be shipped.
By purchasing this file, you acknowledge and agree to the following:
Personal Use Only: This file is intended strictly for personal use. It may not be resold, shared, or used for commercial production without the express written permission of Sahloak, LLC.
No Liability: Sahloak is not responsible for any issues that may arise from the use of this file.
Non-Refundable: All digital purchases are final and non-refundable.
Download Access: After checkout, a download link will be sent to the email address provided. The file will be available for download for 24 hours.
By proceeding with your purchase, you agree to these terms.
Our Mission
Elevate Adventure Experiences with Premium 3D Digital Downloads. Concepts to Adventure.
Customize a Design
If your looking to customize a design we can help. Please fill out the contact information along with a brief description of what is trying to be achieved and we will reach out to discuss further.
